In it to year company "Ex-form" celebrates the anniversary. For 20 years manufacture has reached considerable successes in development, both the Russian market of the gas equipment, and foreign. Especially it is necessary to note following achievements.
For the first time in the Russian Federation our enterprise develops and starts in a batch production a regulator of pressure of gas of a direct-flow design of pilot type for distribution of gas of networks with pressure to 1,2 Mpa.
Essentially new design of regulator RDP allows to reach considerable advantages in comparison c existing analogs. So at RDP higher level of safe operation on deadlock sites of distribution of gas of a network (at the zero expense of gas a gain of pressure after a regulator from nominal (the worker) to the full valve no more than 5 %). Stability of maintenance of the set target pressure at level of 1-2 %. Steady work at decrease in entrance pressure to 0,05 Mpa at low expenses of gas, tightness of a shutter of the executive mechanism on a class "And" GOST 9544. The noise level and vibrations is Considerably lowered.
The regulator of pressure of gas combined РДК-50Н is intended for pressure of gas and maintenance of target pressure in the set limits irrespective of change of entrance pressure and the gas expense. The regulator is supplied by the valve-otsekatelem providing automatic switching-off of giving of gas at emergency fall or increase of target pressure over admissible set limits.
The block design of a regulator allows to make procedural works and repair of the device without its removal from "thread". Besides, application in the valve-otsekatele of a membrane with It is more the active area and the minimum quantity of rubbing details raises accuracy and reliability of operation. The lever system provides reliable closing of the valve and a low gain of pressure of gas at the zero expense ("deadlock"), and the system of unloading of the valve allows to lower considerably non-uniformity of regulation and to reach high throughput.
The regulator of pressure of gas combined РДК-500 is intended for pressure of gas and maintenance of target pressure in the set limits irrespective of entrance pressure and the gas expense.
Thanks to new configuration of a regulator its dimensions were considerably reduced and convenience has raised at adjustment and service. In a regulator the system of unloading of the valve which allows to lower considerably non-uniformity of regulation is applied and to reach high throughput that is especially actual at seasonal pressure decline of gas in networks Gas distribution. The lever system provides reliable closing of the valve and a low gain of pressure at the zero expense. Application in the valve-otsekatele of a membrane with большей the active area and the minimum quantity of rubbing details raises accuracy and reliability of operation. Besides the block design of a regulator allows to make procedural works and repair of the device without its removal from "thread".
Considerable achievement of the company is manufacture of the gas spherical cranes intended for use in quality запорных of devices of external and internal application.
At manufacturing of cranes GSHK the unique technology microarc surfaces of the spherical shutter, protected by the patent of the Russian Federation is used. As a result of application of the given technology on a sphere surface preservation of tightness during all service life is formed high-strength, е a covering, providing in a combination to elastic abrazivo-steady consolidation of a polyurethane. Reliability and tightness are especially important at transportation of natural gas and safe use by its consumer.
The polnoprohodnoe section of a shutter of the crane provides the minimum aerodynamic and hydraulic resistance doesn't interfere with pass of adaptations for pipeline clearing.
On June, 19th 2011 Company "Ex-form" welcomes you on the updated interface of a site!
On June, 19th 2011 On "Ex-form" manufacture the presentation of program complex Pro/ENGINEER has taken place
On June, 9th 2011 On company "Ex-form" manufacture the presentation of program complex SolidWorks Russia has taken place
On May, 27th 2011 Company "Ex-form" will take part in XV International exhibition “DEWS-GASES-EXPOS 2011” - the NEW IMPULSE FOR GAS BRANCH.
